Injuries and Illness

HAVS and HAV Nots: How to Protect Workers From Vibrating Equipment Hazards


One workplace danger not discussed enough is that of bodily harm caused by high levels of vibration. So that’s what our Safety Training Tips Editor has chosen to focus on today.


Tools like jackhammers, drills, woodworking equipment, chipping tools, grinders, chainsaws, and other vibrating equipment can be hazardous in several different ways.


Employees can be injured by contact with moving parts and cutting surfaces. Some of these tools can also be very loud, and prolonged exposure to noise can damage hearing. The flying chips and particles many of these tools generate are eye hazards as well.


And there’s another serious danger: It’s the risk that workers could develop HAVS, or hand-arm vibration syndrome.



Think you’ve got no time to train? Think again. BLR’s 7-Minute Safety Trainer lets you fulfill all key OSHA required training tasks in as little as 7 minutes. Try it at no cost and see! Click to learn more.



Doctors know HAVS as Raynaud’s Syndrome, and your employees may call it “white finger” or “dead finger.” But whatever name you use, HAVS is a big safety problem for employees who use vibrating tools.


HAVS of the hands happens when blood vessels in the fingers collapse as a result of repeated exposure to vibration. Skin and muscle tissues in the hands then don’t get enough oxygen and eventually die. In advanced stages of the disease the entire hand and arm can be affected. Early signs of HAVS include:



  • Numbness and/or tingling in the fingers, hands, or arms
  • Whiteness in the tips of the fingers when exposed to cold
  • Trouble buttoning or zipping clothes, or difficulty picking up small objects 

As the problem gets worse, workers usually experience more frequent attacks of numbness, tingling, and pain, and find it ever more difficult to use their hands.


Engineer vibration out: OSHA says that vibration isolators or damping techniques on equipment can offer effective protection against vibration exposure and HAVS. Vibration isolation mounts may work with some equipment.


Damping techniques can also be effective, and many manufacturers offer tools equipped with vibration-damping materials. Purchase equipment that controls vibration to the maximum degree possible. Ask manufacturers for proof that their vibration-damping designs are effective. And if your maintenance staff applies damping materials to tools, OSHA says that a good rule of thumb is that the damping layer should be the same thickness as the surface being treated.



Try 7-Minute Safety Trainer at no cost or risk. Click for details.



Stand firm on safe work practices: Safe work practices can also help protect employees from HAVS and other vibrating tool hazards. For example:



  • Have employees use non-vibrating tools instead of vibrating equipment whenever possible.
  • Maintain vibrating equipment in good operating condition. Unbalanced rotating parts, dull cutting tools, and so on can increase the amount of vibration.
  • Arrange work tasks so that workers can alternate between using vibrating and non-vibrating tools.
  • Restrict the number of hours a worker uses vibrating tools during the workday.
  • Allow employees to take 10 to 15 minute breaks from the source of vibration every hour.
  • Instruct employees to keep hands warm and dry, and not to grip vibrating tools too tightly. If they let the tool do the work, instead of apply force, there’s less risk of injury.
  • Make sure employees keep alert to laceration and amputation hazards. Operators of any hazardous equipment should always know where both their hands are positioned while working.
  • Require employees to wear appropriate PPE such as eye and hearing protection, and work gloves, especially when working in the cold. (Cold can increase the risk of HAVS.)
  • Instruct employees to report any HAVS symptoms promptly to their supervisor and seek medical treatment.

 




Why It Matters..



  • Some safety experts estimate that as many as half of the millions of U.S. workers who use vibrating tools and equipment will experience some HAVS symptoms.
  • Workers with advanced HAVS may be disabled for a long time.
  • Lacerations, amputations, and other severe hand and finger injuries are potential hazards associated with some types of vibrating equipment.
  • A flying chip created by a vibrating tool can put out an eye unless proper protection is used.
  • Hearing damage caused by unprotected exposure to excessive noise on the job is permanent.







Print

1 thought on “HAVS and HAV Nots: How to Protect Workers From Vibrating Equipment Hazards”

  1. I have been looking for an alternative for cutting curved archways without a saber saw. My saber saw has a lot of vibration. I watched another crew using a new blade called arcus that cut a curved deck floor in minutes. I am now saving time and my hands aren’t going numb.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.